Concrete Stains & Sealers in Tulsa

Concrete Stains & Coloring

colors-eco-stain-beautycreteEco-Stain
A waterbased penetrating concrete stain which is UV-stable, transparent and can be used both vertically & horizontally on concrete surfaces. Ideal for use in the extreme climates and short work-days in Tulsa, Oklahoma, Eco-Stain is a micronized pigment that disperses itself into the pours of the concrete delivering a reactive acid look without all the harmful chemicals and water waste.

 

Packaging:  1 / 5 / 55 Gallon Pails
Colors: 29  (all colors UV-stable)
click here for chart
VOC :  zero g/L (Leed project points)

web_sml_stain                                                                                           KEMIKO® STONE TONE CONCRETE STAIN is a single component reactive stain that transforms an ordinary concrete slab into a luxurious floor that resembles marble or glazed stone at a fraction of the cost. Available in 8 colors, it will not chip, fade or peel. KEMIKO® STONE TONE CONCRETE STAIN may be applied to properly prepared and thoroughly cleaned concrete.

 

Packaging:  1 Gallon Jug
Colors: 8 available colors
Click here for color chart
Low Odor-Low VOC

 

colors-pigmented-sbl-beautycretePigmented Sealer
30% solids pigmented acrylic sealer for applying a solid color with waterproofing to concrete surfaces including concrete overlays in the greater Tulsa area.  This is an especially great product for sealing solid, integrally colored slabs where the customer would like no variation in color.

 

 

Packaging:  5 Gallon Pail
Colors: 30 – standard by SureCrete
click here for chart
VOC :  400 g/L

WB Pigmented Sealer

Pigmented water based acrylic sealer for applying a low sheen solid color with waterproofing to concrete overlays in the greater Tulsa area.  This is an especially great product for sealing SureTex or SureSpray to create a solid colored surface.  This can be applied to new or existing overlay surfaces with the proper preparation.  There are 30 standard colors available.

Packaging:  5 Gallon Pail                                                                                      Colors: 30    color chart

SureSeal – Acrylic Sealers

sealers-super-30-beautycreteSuper 30
30% solids premium clear acrylic concrete sealer used to protect, waterproof concrete surfaces including concrete overlays. A great choice for concrete overlay protection for Tulsa surfaces. This product helps stop efflorescence and moisture migration and is UV-stable.  Super 30 is a much easier to apply high-solids acrylic sealer compared to other industry leading high-solids acrylic sealers which is a great bonus for your labor force in the extreme climates in Tulsa, Oklahoma.

 

Packaging:  5 Gallon Pail
VOC :  600 g/L & 400 g/L

sealers-super-20-beautycreteSuper 20
20% solids premium clear acrylic waterproofing concrete sealer for walkways, driveways and patios in Tulsa, Oklahoma. Super 20 is the perfect sealer for fresh poured concrete, concrete parking garages, and high traffic exterior concrete surfaces.  This is an ideal sealer to help slow moisture migration especially in the moisture heavy climate in Tulsa.  Super 20 is also the ideal re-sealing product to use to restore the color and vibrancy that older decorative concrete once had.  Please give us a call to consult on your specific job to see whether or not it is safe to simply re-seal your project or if a complete strip and re-seal is necessary.

 

Packaging:  5 Gallon Pail
VOC :  600 g/L & 400 g/L

sealers-super-wb-beautycreteSuper WB
30% solids, water based, low VOC, strong bonding, “wet look”, clear acrylic concrete sealer for vertical or horizontal flat and decorative surfaces. Super WB is  environmentally safe and is used as a “GREEN” concrete sealer throughout Tulsa.  This product can also be cut slightly with water to produce a more ‘matte’ look for your surface.  Speak to a representative before cutting any products to make sure that the specific environment you are working on in the Tulsa areas is compatible.

 

Packaging:  5 Gallon Pail
VOC :  Under 100 g/L

High Traffic & Commercial Grade Concrete Coatings

sealers-poly-sb-beautycreteDura-Kote Polyurethane 
51% solids (by volume), glossy, acrylic aliphatic polyurethane for vertical or horizontal concrete surfaces in Tulsa. This product is a two component catalyzed system and is a great choice for interior concrete overlays or flat work.

 

 

Packaging:  2 Gallon Kit
Odor: Solvent
VOC:  Less than 400 g/L
Finish:  High Gloss

sealers-poly-wb-beautycreteDura-Kote WB Polyurethane  
57% solids (by weight), water based acrylic polyurethane concrete sealer for vertical or horizontal concrete surfaces. This water based product is a two component system. A perfect choice for Tulsa concrete projects that need low odor & low VOC attributes, making it the perfect “GREEN” interior concrete sealer!

 

Packaging:  2 Gallon Kit
Odor: None
VOC:  Under 100 g/L
Finish:  High Gloss or Matte

P_Dura-Kote_WB_Epoxy_1GalKitDura-Kote WB Epoxy is a 52% solids (by weight), water based epoxy sealer/primer for vertical or horizontal cementitious surfaces. This product is a two-component system. Dura-Kote WB Epoxy provides the durability of solvent-based systems with the ease and safety of water based systems. It provides superior chemical and abrasion resistance with tenacious bonding.

Coverage:  Approximately 250-300 sq ft. / gallon / coat.                               Packaging:  4 Gallon Kit
Cure Time:  Customarily first coat dries to the touch within 5 – 8 hours.
Apply second coat between 8 – 12 hours.
Light foot traffic may occur after 16 – 24 hours.
Full cure is achieved at 5 – 7 days at 75ºF.

Dura-Kote Epoxy 10P_Dura-Kote_Epoxy_100_1GalKit0 is a 100% solids, epoxy sealer for vertical or horizontal cementitious surfaces. This product is a two component system. SureCrete Dura-Kote Epoxy 100 provides superior chemical and abrasion resistance with tenacious bonding. This product has zero VOC’s.

 

Coverage: 100-200 sq ft per Gallon / per Coat                                               Packaging: 3 Gallon & 15 Gallon kits                                                                          Cure Time:Dries to the touch within 4 – 5 hours.
Optional second coat between 8 -10 hours.
Light foot traffic may occur after 24 hours.
Full cure is achieved at 5 – 7 days at 75ºF

Myers Duran Harley Davidson Prep 2       Myers Duran Harley Davidson After Prep       Myers Duran Harley Davidson Epoxy 2             Prep                             Clean                        Apply

*Above pictures are of pigmented epoxy/urethane application

 

Beauty Crete Supply is located in Tulsa, Oklahoma and we offer concrete supplies for restoring, resurfacing and sealing concrete driveways, sidewalks, foundations, walls, and commercial floors. We supply the greater Tulsa and Oklahoma City areas with decorative concrete supplies such as: Ada, Altus, Alva, Anadarko, Antlers, Apache, Ardmore, Atoka, Barnsdall, Bartlesville, Beaver, Beggs, Bethany, Bethel Acres, Bixby, Blackwell, Blanchard, Boise City, Bridgeport, Bristow, Broken Arrow, Broken Bow, Byng, Cache, Catoosa, Cedar Valley, Centrahoma, Chandler, Checotah, Cherokee, Chickasha, Choctaw, Chouteau, Claremore, Cleveland, Clinton, Coalgate, Collinsville, Comanche, Commerce, Coweta, Crescent, Cushing, Davis, Del City, Dewey, Drumright, Duncan, Durant, Edmond, El Reno, Elgin, Elk City, Enid, Erick, Eufaula, Fairfax, Fairview, Fort Gibson, Frederick, Garber, Geary, Glenpool, Goldsby, Grandfield, Grove, Guthrie, Guymon, Haileyville, Harrah, Hartshorne, Haskell, Healdton, Heavener, Hennessey, Henryetta, Hinton, Hobart, Holdenville, Hollis, Hominy, Hooker, Hugo, Idabel, Inola, Jay, Jenks, Jones, Kellyville, Kingfisher, Kingston, Konawa, Krebs, Langston, Lawton, Lexington, Lindsay, Locust Grove, Lone Grove, Madill, Mangum, Mannford, Marietta, Marlow, Maud, McAlester, McLoud, Medford, Miami, Midwest City, Minco, Moore, Mooreland, Morris, Muskogee, Mustang, New Cordell, Newcastle, Newkirk, Nichols Hills, Nicoma Park, Noble, Norman, Nowata, Oilton, Okarche, Okeene, Okemah, Oklahoma City, Okmulgee, Oologah, Owasso, Panama, Pauls Valley, Pawhuska, Pawnee, Perkins, Perry, Picher, Piedmont, Pocola, Ponca City, Pond Creek, Poteau, Prague, Pryor, Purcell, Quinton, Ringling, Roland, Rush Springs, Sallisaw, Salina, Sand Springs, Sapulpa, Sayre, Seiling, Seminole, Shawnee, Shidler, Skiatook, Slaughterville, Snyder, Spencer, Sperry, Stigler, Stillwater, Stilwell, Stratford, Stroud, Sulphur, Tahlequah, Talihina, Tecumseh, The Village, Thomas, Tishomingo, Tonkawa, Tulsa, Tupelo, Tuttle, Union City, Verdigris, Vian, Vinita, Wagoner, Walters, Warner, Warr Acres, Watonga, Waukomis, Waurika, Waynoka, Weatherford, Wetumka, Wewoka, Wilburton, Wilson, Woodward, Wynnewood, Yale and Yukon concrete acrylic sealers, concrete stains and colorants, concrete polyurethanes, low voc concrete sealers, epoxy sealers, and reactive acid stains.